Remove 3GX - If you do not want a 3GX with your Align kit use code Remove3GX when you sign in during checkout.














Specification(T-REX 700NFL) :
Length:1335mm
Height:450mm
Main Blade Length:690~710mm
Main Rotor Diameter:1562~1602mm
Tail Rotor Diameter:281mm
Engine Pinion Gear:20T
Autorotation Tail Drive Gear:150T
Drive Gear Ratio:8.2:1:4.54(E:M:T)
Fuel Tank Capacity:630cc.
Weight(Without Power System):Approx. 4100g
Instruction(3GX Programmable Flybarless System) :
Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.
A library of pre-configured 3GX settings specifically available for T-Rex series of helicopters, allowing pilots to achieve the most optimal setup for their helicopters.
Three levels of flight mode is available on the 3GX to provide different feels from beginners to advanced pilots.
Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
3GX's rudder control is similar to the high end GP-780 gyro in that rudder sensitivity is catered specifically for the helicopter's rudder response characteristics, allowing consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
Additional peripherals planned for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly available position hold gyro system utilizes only 6 sensors, 3GX’s total of 10 sensors ensure positioning of helicopter with superior accuracy, providing the ultimate solution for aerial photography or other special purposes.
Specification(3GX Programmable Flybarless System) :
Operating Temperature:-10~60 degree
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:36.5x25.2x15.6 mm Size
Weight11g Weight
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without the use of a PC
Compatible with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type recognization
Features:
1.Simple and light weight design provides awesome flight performance.
2.+-15°collective pitch is possible for extreme 3D performance.
3.Heavy duty tail with thrust bearings.
4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
6.Battery tray designed for easy and clean radio gear installation.
7.Fuel Tank Capacity 630cc.
8.Heavy duty tail with thrust bearings.
9.Torque Tube driven tail for incredible 90 sized performance.
10.Rigid frame design that can also handle hard crashes without damage.
11.Super engine cooling system very efficient airflow to provide unequaled cooling and horsepower.
12.New main gear with one-way bearing design for high torque.
13.Ready to fly weight (no fuel) is an incredible 4.1Kg.
Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
Accessories:
T-REX 700 Nitro Kits Set X1
3GX Programmable Flybarless System X1 set
690 3G Carbon fiber blades X1
2 In 1 Voltage regulator combo X1 set
DS610 Digital servoX3 set
DS650 Digital servo X1
GP750 Head lock combo X1
Radio transmitter and electronic equipment required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
Standard servo X1 ( for throttle)
Engine starter X1
Digital pitch gauge X1
Fuel pump X1
Engine fuel X1
90 Muffler X1
Align 91H Engine or 91HP Engine X1
Manufacturer: AlignHeli3GX
SKU: KX018008A